Liebert free cooling evaporative cooling systems transform data center design and meet the efficiency and availability needs of the largest, most complex data center environments. Comprehensive configuration and project management services ensure that our solutions fit each customer’s specific requirements.
The Liebert Direct Evaporative Freecooling Unit delivers the
lowest capital and operating costs, with a mechanical PUE of less than 1.1,
streamlined installation and the industry’s lowest peak power consumption. Options are available for supplemental DX (direct expansion) or chilled water cooling sized for full or trim cooling.
Reduce costs and increase economization hours with the highly efficient Liebert DSE Packaged Free-Cooling Solution. The Liebert DSE is the world’s most widely deployed pumped refrigerant economization system for data centers, with over 6,000 installations.
The Liebert DX Air Handler delivers data center efficiency with the flexibility for modular build outs. Multiple configurations include outside air economization, evaporative condensing and evaporative cooling to reduce energy consumption.
The Liebert EFC Indirect Evaporative Freecooling System is a highly reliable and efficient cooling system for colocation, cloud hosting and other large data centers. It combines a highly efficient heat exchanger and advanced Liebert iCOM controls to help customers save money, reduce risks and simplify thermal management. The Liebert EFC achieves mechanical PUE levels as low as 1.03, provides a single footprint for rapid deployment and is a highly scalable solution.
The Liebert Indirect Evaporative Free Cooling Unit improves energy efficiency with potential PUEs under 1.2 with minimal water usage. It includes supplemental DX (direct expansion) or chilled water options for trim cooling requirements.
Vertiv BBE BD Series UPCBDs are round-cornered, square-design telephone closures suitable for copper or fiber* distribution. These closures are USDA accepted for use by the Rural Development Utilities Program (RDUP). The UPCBD3, UPCBD4, and UPCBD5 include a dielectric shield, cable ties, and a shield isolation bonding/grounding bracket assembly. Specific uses include termination of buried service wires and all types of splicing arrangements.
Distribution enclosures for buried cable plant.
Vertiv BBE DSL Series enclosures are designed to accommodate up to four DSLAMs or other environmentally hardened electronic equipment, and cable splicing. These above ground galvanized steel housings deliver maximum interior capacity and easy access to install and maintain active hardened telecom equipment. Screened louvered vents maximize heat dissipation and help minimize contaminant ingression.
The Vertiv BBE DSX Series of enclosures integrate a protective, ventilated compartment for weather-hardened DSLAM electronics with a weather-resistant compartment for cross-connect fields in a single enclosure.
The Vertiv BBE FDH Series of fiber distribution hub pedestals provides connections between fiber optic cables and passive optical splitters in the outside plant environment.
The Vertiv BBE FDP Series of optical splice enclosures permits fiber splicing, improves cable organization and houses environmentally hardened drop connections in FTTP applications.
The Vertiv BBE OPFO Series of metallic and non-metallic pedestal enclosures is designed to protect fiber optic splices and equipment in both buried and aerial distribution systems. These large capacity enclosures are equipped with universal mounting systems to accommodate most 3rd party splicing closures. The fiber splice capacity is limited only by the size of the splice closure. Cable management posts allow for maximum storage of cable. A ground bar (OPFOP) and mounting hardware are included.
Non-metallic 360° Access Pedestals for Buried Distribution Telecom applications
Multi-purpose copper/fiber splice or equipment pedestal enclosures for high pair-count splices, cross-connect interface, fiber/coaxial equipment, loop treatment electronics, and combined connection applications.
Vertiv BBE TV Series pedestal enclosures are above ground housings that protect CATV distribution equipment.
CXE / BBE / XTE Accessories for outdoor enclosures and related equipment include a wide variety of supporting tools, paint, terminal blocks, mounting equipment, labels and more.
The pole-mounted AEX Series is an integrated interface system consisting of a housing and drop-down terminal field the interface between feeder and distribution cables.
The Vertiv CXE BET Series BSBT provides a cross-connect system for apartment buildings, townhouses, condominiums, light commercial buildings, and other multidwelling units (MDUs). This terminal features a splice chamber capacity of up to 300 pairs. The complete unit consists of the housing and divider plate. The plate is also available individually for upgrading existing Emerson BSBT housings via an easy-to-use slip hinge.
The Vertiv CXE BET Series BUP is an outdoor-rated, self-contained building entrance protector for indoor or outdoor applications. BUP building entrance protectors provide a termination, protection, and distribution point for twenty-five, fifty, or one-hundred pairs (stackable to 300 pairs) at the subscriber premises. Potential application locations include multi-tenant dwelling complexes, hospitals, factories, shopping strip malls, schools, and campus environments.
The Vertiv CXE BET Series indoor building entrance terminals protect the demarcation point between a Local Exchange Carriers’s outside plant cable and a customer’s building or premise cables.
NetReach CO Series central office connectors that protect personnel and equipment from abnormal voltages and currents on incoming cable pairs and terminal blocks to connect to equipment.
Vertiv CXE R66 Series blocks are used in telephone equipment rooms or sattelite closets to install key telephone systems, PBX systems, data cables, and other low voltage terminal equipment
RLS Series IDC terminal blocks
Vertiv CXE EXX Series expansion cabinets allows an existing cross-connect cabinet to increase from its original size without disrupting service.
The Vertiv CXE LCX Series offers an economical way to satisfy low pair count cross connect needs up to 900 pair using RLS50 blocks. These affordable, above-ground metal pedestals offer many of the same features as larger, more expensive cross-connect enclosures and can be pad-mounted or direct buried.
The UCX Series is an enhanced DRLS drop-down style center-feed cross-connect interface system equipped with 50-pair RLS terminal blocks, in pair counts up to 8100 pairs.
The Vertiv CXE UNX Swing-Out Series is a cross-connect interface system featuring a center-feed horizontal jumper run for efficient installation of jumpers. The cabinets are equipped with RLS50 self-strip terminal blocks, and are available in pair counts of up to 5400 pairs. Vertive CXE XC cabinets are intended for use as a serving area interface or in a standard cross-connect application for feeder and distribution cables.
The UPX Series are round-cornered, rectangular-design telephone cross-connect enclosures.
Compact power, equipment and battery enclosures designed for small cell sites at the network edge.
Designed to discretely house DC power equipment, electronics and batteries in a single robust enclosure. The Vertiv XTE 401 Series is a family of three small single-sided low-cost indoor or outdoor rated aluminum enclosures. These enclosures can be equipped with a variety of inexpensive cooling, power, protection and battery options.
Vertiv XTE 601 Series of scalable outdoor enclosure solutions designed to ensure environmental stability for sophisticated electronic equipment and provide years of trouble-free service wherever the outdoor enclosure is deployed.
The Vertiv XTE 601B Series enclosures are available in a variety of heights and designed to accept NiCd and/or VRLA batteries, and can be cooled actively or by free air.
Designed to support C-RAN technology today while providing the flexibility to adapt to the 5G infrastructure needs of tomorrow. Streamline infrastructure at your site by consolidating electronics, power and batteries in a single enclosure.
The Vertiv XTE 802 Series Network Edge Enclosure, constructed entirely of lightweight steel, ensures vital electronic equipment is protected from vandalism and environmental damage.
Designed to be installed in eight hours or less, the Vertiv™ XTE Platform Series is ideal for rapidly deploying cell sites. Prefabrication saves money, simplifies installation, and minimizes site disturbance.
Vertiv XTE PTS Series provides main service disconnect, AC surge protection, AC distribution and generator connection in a single environmentally protected enclosure geared toward remote telecom installations.